Ste Gough and the Three G's

Guitars, Guns and Girls...

Category

Full Bore

NTTC/FAST February 2016 – Compilation Video

Accuracy International Thread Protector – AT Threaded Barrel

Recently I purchased a second hand Accuracy International AT Model Rifle, a rifle which has a factory barrel threaded in 18×1.5mm. This thread is often used with the factory muzzle break, which comes with a clamp back from the thread… Continue Reading →

FAST Czech Republic NTTC/NTBS Course Shotgun, Rifle and Pistol

Last week I went back to Czech Republic with the ‘usual suspects’, FAST Czech Republic consisting of Christian Goblas (Main instructor), Luboš Kulhavý (Instructor), brought together by Froggy (Yves) from full-bore.co.uk. This time hoping to add the third gun to our… Continue Reading →

Shooting Abroad: First Time Shooting Pistols In The US

Preface Me and my partner (Caty) have just got back from a trip to the USA. As I’m always on the look out to shoot things that cannot be owned in the UK, and our tour of the states started… Continue Reading →

Field Stripping a Remington 700 Bolt

A nice quick blog post. How to field strip a Remington 700 Bolt This one is dead simple, it requires no tools and is much easier if you have a coin in your pocket. Remove the bolt from the rifle…. Continue Reading →

RPA Quadlite Action And 30″ Krieger Stainless Barrel Cleaning – C2R

As we saw in my eBay Borescope Review, My Krieger Barrel on my RPA Ranger Target Rifle was not in the best of shape, even though after every range outing I had cleaned it “thoroughly” with Forrest Bore Foam, Nylon… Continue Reading →

Field Stripping and Cleaning RPA Quadlite Bolt

Whilst cleaning my RPA ranger (RPA Quadlite Actioned Target Rifle) I decided to take the bolt apart for the first time. I’d not done this before on this rifle, and decided to look on the web for a manual or… Continue Reading →

Live Rounds Testing Tier One Spartan 3 Moderator .223

Preface Following on from my Tier One Spartan 3 Moderator Comparison Review – .223 Blanks test a few weeks ago, I finally got chance to get to the range and do some Load Development for my Remington 700 in .223… Continue Reading →

TBT: FAST Czech Assault Rifle Training NTTC NTBS

Preface As I write this it is approximately 9 months after this Assault Rifle Training weekend, as such some of the details may be hazy and incorrect, but I’ll try and document what we did as best as I can…. Continue Reading →

Moderators/Suppressors First Round Pop

During my testing of my first ever moderator, the Tier One Spartan 3 I noticed that the first round when I changed out the fitments, or fitted the suppressor on to the end of the barrel was considerably louder than… Continue Reading →

© 2017 Ste Gough and the Three G's — Powered by WordPress

Theme by Anders NorenUp ↑